spectro::lyser UV

spectro::lyser™ UV monitors depending on the application an individual selection of: NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, BTX, AOC, fingerprints and spectral alarms, temperature and pressure.

 

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry over the total range (190-390 nm)
  • multiparameter probe with adjustable open path length
  • ideal for surface water, ground water, drinking water and waste water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air
  • mounting and measurement directly in the media (InSitu) or in flow cell (monitoring station)
  • operation via s::can terminals & s::can software
  • recomended by and complient with public authorities and international agencies such as Chinese EPA, US EPA and CPCB

 

Details Drinking Water Details Waste Water

 

Accessories - Installation

submersed

  • ruck::sack
    • submersible Autobrush for spectrometer probes and i::scan
    • exchangeble brushes for spectrometer probe with path length 35, 15, 5 mm and i::scan 35, 5 mm
    • one Basis module (motor unit) for all Versions
    • shelter protects the brush from clogging

     

    technical specification
    power supply: 12 VDC
    power consumption (typical): 150 mA (average)
    power consumption (max.): 300 mA
    cable length: 7.5 m
    housing material: POM-C
    dimensions (width x height x xdepth): 182 x 46 x 36.5 mm
    weight (min.): 750 g
    installation / mounting: submersed
    operating pressure 0 ... 0.5 bar
    ingress protection class: IP68
    storage temperature: -20 ... 80 °C
    storage humidity: 0 ... 95 %

    part numbers
    F-146-rs-35: ruck::sack submersible AutoBrush for spectro::lyser 35 mm
    F-146-rs-15: ruck::sack submersible AutoBrush for spectro::lyser 15 mm
    F-146-rs-05: ruck::sack submersible AutoBrush for spectro::lyser 5 mm
    F-146-rs-iscan-35: ruck::sack submersible AutoBrush for i::scan 35 mm
    F-146-rs-iscan-05: ruck::sack submersible AutoBrush for i::scan 5 mm

    recommended accessoires
    F-146-brush-35: Brush for ruck::sack - 35 mm spectro::lyser (spare part)
    F-146-brush-15: Brush for ruck::sack - 15 mm spectro::lyser (spare part)
    F-146-brush-05: Brush for ruck::sack - 5 mm spectro::lyser (spare part)
    F-146-brush-iscan-35: Brush for ruck::sack - 35 mm i::scan (spare part)
    F-146-brush-iscan-05: Brush for ruck::sack - 5 mm i::scan (spare part)

  • s::can compressor
    • provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
    • removal of fouling using compressed air
    • aluminium housing IP65 for wall mounting
    • optional 12 VDC or 110 VAC version available
    • railing-mounting set available

     

    technical specification
    power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
    power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
    power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
    assembling: ex works
    housing material: aluminium
    dimensions (width x height x depth): 218 x 253 x 105 mm
    weight (min.): 4.9 kg
    process connection: 1/4
    installation / mounting: Mounting bracket d6 / 0.25 dia
    operating temperature: -10 ... 40 °C
    operating pressure: 0 ... 6 bar
    Ingress protection class: IP 65
    tank volume: 0.4 l
    charging time: typ. 25 sec
    sound emission: 60dB(A)
    service interval: 1500 operating hours
    storage temperature: -10 ... 60 °C
    storage humidity: 0 ... 95%

    part numbers:
    B-32-230,
    B-32-110
    B-32-012

    recommended accessories
    B-44 cleaning valve
    B-44-2 cleaning valve
    C-31-eu optional 2 m power cable
    C-31-us optional 2 m power cable

  • cleaning valve
    • supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
    • removal of fouling, sediments and clogging using
    • compressed air or water
    • version B-44-2 specially for use in comination with the s::can compressor

    technical specification
    cable length: 2.4 m (B-44); 1 m (B-44-2)
    assembling: ex works
    dimensions (width x height x depth): 85 x 75 x 70 mm
    weight (min.): 500 g
    process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8"; B-44-2: pressure side quick coupling d6x4, at sensor direction push-pull d6x4
    protection class: IP 65
    part number: B-44 or B-44-2

    recommended accessories
    B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
    B-41-spectro: pressure connection replacement set s:.can spectrometer probe

  • carrier s::can spectrometer probe
    • for proper and easy submersed installation of s::can spectrometer probes
    •  probe cable and pressure hose compatible
    • mounting with pipe (AD 50 mm)

     

    technical specification
    housing material: PVC and POM-C
    dimensions (diameter x length): 63 x 403 (for F-110-spectro); 63 x 510 mm (for F-120-spectro)
    weight (min.): 900 g
    process connection: ID 50 mm
    installation / mounting: submersed
    part number: F-110-spectro (for horizontal attachment)
    part number: F-120-spectro (for vertical attachment)

    recommended accessories
    F-15 fixing adapter - stainless steel

  • fixing adapter - stainless steel
    • supports the proper and easy installation of s::can systems
    • quick mounting and demounting of InSitu installed s::can probes and sensors

     

    technical specification
    housing material: stainless steel
    weight (min.): 2.6 kg
    process connection: ID 50 mm
    part number: F-15

    recommended accessories
    F-14-3 mounting pipe - stainless steel

by-pass

  • s::can compressor
    • provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
    • removal of fouling using compressed air
    • aluminium housing IP65 for wall mounting
    • optional 12 VDC or 110 VAC version available
    • railing-mounting set available

     

    technical specification
    power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
    power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
    power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
    assembling: ex works
    housing material: aluminium
    dimensions (width x height x depth): 218 x 253 x 105 mm
    weight (min.): 4.9 kg
    process connection: 1/4
    installation / mounting: Mounting bracket d6 / 0.25 dia
    operating temperature: -10 ... 40 °C
    operating pressure: 0 ... 6 bar
    Ingress protection class: IP 65
    tank volume: 0.4 l
    charging time: typ. 25 sec
    sound emission: 60dB(A)
    service interval: 1500 operating hours
    storage temperature: -10 ... 60 °C
    storage humidity: 0 ... 95%

    part numbers:
    B-32-230,
    B-32-110
    B-32-012

    recommended accessories
    B-44 cleaning valve
    B-44-2 cleaning valve
    C-31-eu optional 2 m power cable
    C-31-us optional 2 m power cable

  • cleaning valve
    • supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
    • removal of fouling, sediments and clogging using
    • compressed air or water
    • version B-44-2 specially for use in comination with the s::can compressor

    technical specification
    cable length: 2.4 m (B-44); 1 m (B-44-2)
    assembling: ex works
    dimensions (width x height x depth): 85 x 75 x 70 mm
    weight (min.): 500 g
    process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8"; B-44-2: pressure side quick coupling d6x4, at sensor direction push-pull d6x4
    protection class: IP 65
    part number: B-44 or B-44-2

    recommended accessories
    B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
    B-41-spectro: pressure connection replacement set s:.can spectrometer probe

More Accessories

  • cleaning brush
    • supports quick, easy and proper cleaning of optical windows of s::can spectrometer probes
    • mechanical removal of persistent window fouling
    • for pathlength 2, 5 or 15 mm

     

    technical specification
    dimensions (diameter x length): length 200 mm
    weight (min.): 1 g
    part number: B-60-1 for 2 mm
    part number: B-60-2 for 5 or 15 mm

  • cleaning agent
    • supports quick, easy and proper cleaning of optical windows of s::can spectrometer probes
    • chemical removal of persistent window fouling
    • very effective for grease and organic fouling

     

    technical specification
    weight (min.): 1.3 kg
    part number: B-61-1

  • multifunctional slide for pathlengths from 0.5 mm to 35 mm
    • for referencing of spectrometer probes
    • for pathlength 0.5 - 35 mm
    • for spectral measurement in laboratory

     

    technical specification
    dimensions (diameter x length): 60 x 100 mm (outside)
    installation / mounting: for 0.5 mm to 35 mm
    part number: E-421-1

You may also like…

  • moni::tool

    moni::tool is a revolutionary new platform for the management of an almost unlimited number of stations, online probes, analyzers and parameters. Intuitive operation – on site or remote – and reams of valuable features make moni::tool essential for state of the art sensor and station management.

  • micro::station for Drinking Water

    The s::can drinking water micro::station is designed for online monitoring of water quality parameters in clean media. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipework on a compact panel. The fully modular micro::station combines s::can instruments…