s::can’s ammo::lyser monitors and controls aeration blowers using NH4-N, improving the plant’s energy efficiency and lowering operational costs.
ammo::lyser pro
A multi-parameter probe for the online measurement of ammonium. It is an absolutely reliable device outclassing conventional analysers in terms of measurement stability and lifetime. Precision is guaranteed by real time compensation of the ammonium value with temperature, pH and potassium and a high performance reference electrode.
ammo::lyser™ III pro: monitors NH4-N and temperature
ammo::lyser™ IV pro+pH monitors NH4-N, temperature and pH (with potassium compensation)
ammo::lyser™ IV pro+NO3-N monitors NH4-N, temperature and NO3-N (with potassium compensation)
- s::can plug & measure
- Measuring principle: ISE (ionselective electrodes) – with optional potassium compensation
- Multiparameter probe
- Long term stable, factory precalibrated
- Automatic cleaning with compressed air
- Unique, non-porous / non-leaking reference electrode for technically unrivalled and consistent performance
- ISE refurbishment – the easy way to minimise maintenance
- Easy & quick mounting and measurement directly in the media (InSitu) or in flow cell (monitoring station)
- Operation via s::can terminals & s::can software
- Automatical temperature compensation, pH compensation possible
- Ideal for surface water, ground water and drinking water, also for applications in waste water
- Minimal maintenance
- Life time of ISE: typically 6 month (for applications <1mg/l NH4-N), resp. 1 to 2 years (for applications >1mg/l NH4-N)
Fotos
ammo::lyser References
-
Colorado Springs Utilities effectively controls aeration blowers in its waste water treatment plant
-
First Nation communities in Canada remotely monitor the quality of their drinking water
s::can’s event detection system remotely monitor the drinking water quality of sixty small water systems in the First Nation communities… -
Jianshan Waste Water Treatment Plant controls the nitrogen removal process and optimizes the carbon source dosage
The s::can system enables the operator to control the nitrification and denitrification process accurately, and to control the aeration as… -
Monitoring one of the most polluted rivers in the world
The Atoyac River in Mexico is one of the most polluted rivers in the world. It is so contaminated, mainly…
Accessories - Installation
submersed
-
cleaning valve
- supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
- removal of fouling, sediments and clogging using
- compressed air or water
- version B-44-2 specially for use in comination with the s::can compressor
technical specification
cable length: 2.4 m (B-44); 1 m (B-44-2)
assembling: ex works
dimensions (width x height x depth): 85 x 75 x 70 mm
weight (min.): 500 g
process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8"; B-44-2: pressure side quick coupling d6x4, at sensor direction push-pull d6x4
protection class: IP 65
part number: B-44 or B-44-2recommended accessories
B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
B-41-spectro: pressure connection replacement set s:.can spectrometer probe -
s::can compressor
- provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
- removal of fouling using compressed air
- aluminium housing IP65 for wall mounting
- optional 12 VDC or 110 VAC version available
- railing-mounting set available
technical specification
power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
assembling: ex works
housing material: aluminium
dimensions (width x height x depth): 218 x 253 x 105 mm
weight (min.): 4.9 kg
process connection: 1/4
installation / mounting: Mounting bracket d6 / 0.25 dia
operating temperature: -10 ... 40 °C
operating pressure: 0 ... 6 bar
Ingress protection class: IP 65
tank volume: 0.4 l
charging time: typ. 25 sec
sound emission: 60dB(A)
service interval: 1500 operating hours
storage temperature: -10 ... 60 °C
storage humidity: 0 ... 95%part numbers:
B-32-230,
B-32-110
B-32-012recommended accessories
B-44 cleaning valve
B-44-2 cleaning valve
C-31-eu optional 2 m power cable
C-31-us optional 2 m power cable
by-pass
-
cleaning valve
- supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
- removal of fouling, sediments and clogging using
- compressed air or water
- version B-44-2 specially for use in comination with the s::can compressor
technical specification
cable length: 2.4 m (B-44); 1 m (B-44-2)
assembling: ex works
dimensions (width x height x depth): 85 x 75 x 70 mm
weight (min.): 500 g
process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8"; B-44-2: pressure side quick coupling d6x4, at sensor direction push-pull d6x4
protection class: IP 65
part number: B-44 or B-44-2recommended accessories
B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
B-41-spectro: pressure connection replacement set s:.can spectrometer probe -
s::can compressor
- provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
- removal of fouling using compressed air
- aluminium housing IP65 for wall mounting
- optional 12 VDC or 110 VAC version available
- railing-mounting set available
technical specification
power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
assembling: ex works
housing material: aluminium
dimensions (width x height x depth): 218 x 253 x 105 mm
weight (min.): 4.9 kg
process connection: 1/4
installation / mounting: Mounting bracket d6 / 0.25 dia
operating temperature: -10 ... 40 °C
operating pressure: 0 ... 6 bar
Ingress protection class: IP 65
tank volume: 0.4 l
charging time: typ. 25 sec
sound emission: 60dB(A)
service interval: 1500 operating hours
storage temperature: -10 ... 60 °C
storage humidity: 0 ... 95%part numbers:
B-32-230,
B-32-110
B-32-012recommended accessories
B-44 cleaning valve
B-44-2 cleaning valve
C-31-eu optional 2 m power cable
C-31-us optional 2 m power cable -
flow cell for ISE probe (waste water)
- For proper and easy flow-through installation of ammo::lyser in wastewater
technical specification
housing material: PVC
dimensions : 177 x 83 x 108 mm
Part Number: F-48-ammo
You may also like…
-
con::cube V3
con::cube – a compact, versatile terminal for data acquisition and station control. Newest processor technology and very flexible options for interfacing to SCADA or any central database systems makes the con::cube in combination with moni::tool a powerful terminal for compact station control. s::can high-end IoT (Internet of Things) terminal… -
micro::station for Drinking Water
The s::can drinking water micro::station is designed for online monitoring of water quality parameters in clean media. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipework on a compact panel. The fully modular micro::station combines s::can instruments… -
micro::station for Waste Water
The s::can micro::station for waste water is designed for online monitoring of water quality parameters in waste water. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipes on a compact panel. The fully modular micro::station combines s::can…
